A) Stain 26 blocks, 2 dowels, and 4 large beads. Let dry.
A) Assemble a corner post by gluing 3 blocks together, end to end. Tip: For all future steps, hold the blocks together until the glue sets up.
B) Repeat this process to create the other three corner posts. Let all four sides dry.
A) Assemble the lantern base by gluing 8 blocks together, stacked side by side. Let dry.
A) Glue a block on one long side of the base. Center it between the ends. Let dry.
B) Glue a block on the other long side of the base. Center it between the ends. Let dry.
C) Glue a corner post on each end of the block from Step 4a. Let dry.
D) Glue a corner post on each end of the block from Step 4b. Let dry.
A) Glue a block at the top, in between the first two corner posts.
B) Glue a block at the top, in between the second two corner posts.
C) Glue a block at the top, on the third open side.
D) Glue a block at the top, on the last open side.
A) Glue the four wood beads to the bottom corners of the lantern base. Let dry.
A) To add dowels, measure and mark the length of each side with a pencil. You will need eight pieces. Tip: Be sure to measure each section individually, as the lengths may vary slightly between corner posts.
B) Use a craft knife and score around the dowel on the pencil line.
C) Break at the score mark.
D) Sand the ends until smooth.
A) Glue the dowels to the top sections of the corner posts. Let dry.
B) Glue the dowels to the bottom sections of the corner posts. Let dry.